Skip to content
‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎‏‏‎ ‎ G‎‏‏‎‎‏‏oing to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV‎‏‏‎‏‏‎‏‏‏‎
‎After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days ‏‏‎ Going to SEMA? See What's NEW from Milton Industries • Booth #37183 • Nov. 5-8 • Las Vegas, NV
PMXPPC007A -ProCutter-Assembly
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
SAVE 0%
PMXPPC007A -ProCutter-Assembly
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter
Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter

Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter

ProMAXX Tool

Part #: PMXPPC007A

Flatten the damaged stud to permit on-center walk free drilling. Knock off the burr on the remaining remnant that acts just like a lock washer restricting manifold stud/bolt extraction – all in five seconds. The aggressive cutting blade is a super-fast operation, leads to higher extraction rates and reduced risk of a broken extractor. Available in both straight shank and 1/4”x 28 TPI shank for the ProMAXX PowerDrive™ and other limited access drills.

Check out the PowerDrive Threaded Adapter version allows for use with 1/4” ratchet.

From: $24.95-$99.95
$79.95
$0.00
Save:

Quantity

Broken Bolt Air Or Cordless Drill/Drive ¼” Ratchet Adapter Cut Through Burrs -ProCutter

ProCutter Part #: PMXPPC007A

Flatten the damaged stud, remove corrosion and burr on the remaining remnant that restricts broken exhaust manifold stud extraction.

The aggressive cutting blade on this accessory cuts through burrs and removes corrosion in just seconds. This super-fast operation leads to higher extraction rates and reduced risk of a broken extractor.

Threaded adapter allows for use with 1/4” ratchet.

Type of Hose :
Type of fiiting :
Thread Size :
SCFM :
PSI range :

The ProCutter is 7mm in diameter. The arbor it attaches to is 1/4 x 28 TPI thread and inserts into the PowerDrive Adapter.

This device is designed to remove the burr created on an 8mm x 125 TPI fastener when broken. For exhaust manifold applications, the slim low profile design assists in reaching hard-to-reach areas like behind the shock tower on Ford and under the firewall on GM.

The ProCutter will deburr and clean the corrosion away in the tapped hole in the cylinder head and flatten the remaining stud remnant for easy extraction. It will also work on hard-to-reach spot welds in auto body applications for removing panels. The 1/8” arbor tip rises slightly above the cutter, making it compatible with a 1/8” pilot hole prohibiting walk and allowing for perfect alignment on all drilling applications.

This device will perform tasks similar to a $400-600 aviation drill but at a fraction of the cost. It utilizes an existing air or cordless 1/4” drive ratchet, providing a cost-effective solution.

Part Numbers: PMXPPC007A, PPC007A, PPC007, PMXPPC007, PMXPPCARB, PPCARB

Related Products

SHIPPING INFO

For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today
724-941-0941

Promaxx Tool Address

1121 Boyce Road
Suite #2000
Pittsburgh, PA 15241

Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.