What is the POWERTECH SET - CHARLIE Exhaust Manifold Repair Combo Kit?
The POWERTECH SET - CHARLIE Exhaust Manifold Broken Bolt Stud Repair Combo Kit, along with every other USA-made ProMAXX Tool solution, greatly reduces repair times, allowing professional vehicle technicians and skilled mechanics to quickly make the fix and move on to other jobs. The kit is easy to use, and it comes with instructions and schematics that show the best ways to mount the three different guide plates and use the included drill bit tooling to get at every broken bolt on the manifold. Three popular jig guide plates are included, one for each of these Ford, GM, and CDJR engines. Includes Guide Plates: FORD - Rocky II/ GM - Mikey II/ CDJR - Alan
Make the Broken Bolt Repair Fast…ProMAXX Fast!
With a focus on book time saved, return on investment, and increased productivity, experienced technicians and mechanically adept individuals who follow the provided instructions can use the guide plates in this kit to make the fractured stud repair in approximately 15 minutes per bolt*. A professional-grade drive ratchet is required to make the repair. The guide plate bolts to the top or bottom of the cylinder head, providing unrivaled accuracy and precision.
*Repair times may vary depending on the location of the broken bolt, whether a previous extraction attempt such as welding has occurred, if a previous repair resulted in a broken extractor or bit and the number of broken bolts. In repairs with multiple broken bolts, ProMAXX Tool recommends purchasing additional Drill Bits. In the case of repairs involving broken bits or extractors, a ProMAXX Tool Broken EZ Out / Extractor Repair Kit is recommended.
How does the POWERTECH SET - CHARLIE Broken Bolt Repair Kit work?
Like all ProMAXX Tool broken bolt repair kits, the POWERTECH SET - CHARLIE Engine Exhaust Manifold Broken Bolt Stud Repair Kit stands out for its exclusive screw-in bushings and proprietary mating angles, which ensure perfect alignment of the ProPlate jigs with the cylinder head. The ProPlates can be bolted in any position with included precision fasteners, providing unparalleled repeatable and predictable results.
This level of accuracy and precision sets the kit apart from other products on the market, which rely on inexpensive clamps or loose slip-fit bushings. The accuracy allows the user to drill dead-center on the bolt hole.
For previous repair attempts or botched repairs, the ProKit’s larger plate holes provide the use of a Thread Repair Kit that includes bushings, bits, and black-oxide coated threaded inserts to restore the cylinder head to factory condition.
Premium Machine-Shop Grade Drill Bit Tooling Included
ProMAXX Tool’s USA-made machine-shop-grade tooling bits are ground at 135° cutting angle (lip) with a split point. Flat ground bits cut slower and are long-lasting but less accurate and will walk while drilling.
Split point ground bits will stay on center to reduce walking because they have four cutting edges and distribute loads better. They work well on curved shapes and alloy and stainless steels because it creates smaller chips to minimize clogging holes and breaking bits.
To prevent drill bit breakage, closely follow the instructions in the Exhaust Manifold Repair Kit User Guide.
How to Fix a Broken Exhaust Manifold Bolt Using the POWERTECH SET - CHARLIE Stud Repair Kit
The steps to use the POWERTECH SET - CHARLIE Repair Kit are detailed in the included Exhaust Manifold Repair (EMR) user guides. The guides provide a step-by-step guide on how to mount the ProPlates to the cylinder head, how to insert the ProBushings and ProDrill bits into the ProPlates, how to set the cutting edge, and how to extract the bolt remnant or go Extractorless™ and drill the bolt out entirely. In the case of extraction or tap failure, ProMAXX Tool provides free 24/7 technical support at 724-941-0941.