Skip to content
For Expedited Orders Past 1:00 PM EST, Call Us 724-941-0941 | We Process Orders Quickly and Shipped per Your Request. ‏‏‎‏‏‎‏‏‎‏‏‎‏‏‏‎
For Expedited Orders Past 1:00 PM EST, Call Us 724-941-0941 | We Process Orders Quickly and Shipped per Your Request.‏‏‎‏‏‎
Warranty Shipping Contact 724-941-0941 Have a new tool idea?
SAVE 0%
Part#: 509

15" Hose Whip w/ Dual Head Chuck, Replacement

Milton Industries Inc.®

Part #: 509
Number of Items in This Pack: 1
  • Replacement part
  • Used to replace hose whip on Milton® inflator gauge #506
  • Dual Head Chuck 1/8" -27 threads NPT
  • Hose Whip 3/8" - 24 threads NPS
  • 10 to 160 pounds per square inch
$27.31
Save:
$27.31

Quantity

Continue to Your Cart
Continue to Your Cart

15" Hose Whip w/ Dual Head Chuck, Replacement

This 15 inch heavy duty hose whip can be used to replace the old hose on the original dual head inflator gauge #506.

INSTRUCTIONS FOR USE:

If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.

Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.

Type of Hose :
Type of fiiting :
Thread Size :
SCFM :
PSI range :

This 15 inch heavy duty hose whip can be used to replace the old hose on the original dual head inflator gauge #506.

INSTRUCTIONS FOR USE:

If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.

Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.

Related Products

SHIPPING INFO

For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

WARRANTY INFO

Offering a range of policies

NEED HELP

Contact our support team today
724-941-0941

Promaxx Tool Address

1121 Boyce Road
Suite #2000
Pittsburgh, PA 15241

Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.