Skip to content
After 1pm EST, Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days
After 1pm EST Expedited Orders are NOT Guaranteed to Ship Same Day | UPS Ground Processing Time is 1-3 Business Days
PMXEII200PRO-Elizabeth-ProKit
PMXEII200PROP-Elizabeth-ProKit-Plus
Ford 3.5L EcoBoost Exhaust Manifold Broken Bolt Repair Base Kit
Ford 3.5L EcoBoost Exhaust Manifold Repair ProPlate
SAVE 0%
PMXEII200PRO-Elizabeth-ProKit
PMXEII200PROP-Elizabeth-ProKit-Plus
Ford 3.5L EcoBoost Exhaust Manifold Broken Bolt Repair Base Kit
Ford 3.5L EcoBoost Exhaust Manifold Repair ProPlate

Ford 3.5L EcoBoost Exhaust Manifold Broken Bolt Repair Kit - Elizabeth

ProMAXX Tool

Part #: PMXEII200PRO

PMXEII200PRO Elizabeth ProKit Includes:

  • PMXEII200 – Elizabeth ProPlate
  • PMXPPF008500D - ProPlate Fasteners (Set of 2)
  • PMXPPB2188 - ProBushing – MED
  • PMXPPB2266 - ProBushing – LRG
  • PMXPPB2320 - ProBushing - TAP (8MM)
  • PMX PPMXLT188 - ProDrill Platinum Bit
  • PMXSSSC266 - ProDrill™ Machine Tooling Drill
  • PMXPPT0080125 - ProTap Bottom Tap - 8mm X 125 EMR
  • PMXPPL001 - ProLube Drill/Tapping Fluid
  • (Kit contents subject to change)

Best Value - PMXEII200PROP Elizabeth ProKit Plus Includes:

  • PMXCD200 – Chad ProPlate
  • PMXPPF008500D - ProPlate Fasteners (Set of 2)
  • PMXPPB2188 - ProBushing – MED
  • PMXPPB2266 - ProBushing – LRG
  • PMXPPB2320 - ProBushing - TAP (8MM)
  • PMXPPMXLT188 - ProDrill Platinum
  • PMXSSSC266 - ProDrill™ Machine Tooling Drill
  • PMXPPM188 - ProMill 3/16” End Mill Four Flute
  • PPL001 - ProLube Drill/Tapping Fluid
  • (Kit contents subject to change)

PMXEII200BSE Elizabeth Base Kit Includes:

  • PMXEII200 – Elizabeth ProPlate
  • PMXPPF008500D - ProPlate Fasteners (Set of 2)
  • PMXPPB2188 - ProBushing – MED
  • PMX PPMXLT188 - ProDrill Platinum Bit
  • (Kit contents subject to change)

The Elizabeth II ProKit facilitates the removal of broken exhaust manifold bolts on Ford EcoBoost 3.5L and 3.7L engines. The kit removes broken exhaust manifold studs / bolts on Ford EcoBoost 3.5L and 3.7L Coyote engines. For Ford F-150 and Ford Transit. Made In USA. Twin turbochargers, broken titanium bolts, small engine bays, along with dimensional changes in the cast iron manifolds due to extreme heat create new problems for the servicing technician. Elizabeth II is the answer to makle technicians more productive.

From: $249.95-$399.95
$349.95
$399.95
Save: 13% 11%

Quantity

See 3.5L EcoBoost Broken Exhaust Manifold Bolt Removal Kit in Action!

The Ford 3.5L EcoBoost Exhaust Manifold Broken Bolt Repair ProKit gives technicians a productive solution for the challenging repairs they face. Quickly remove broken bolts by drilling dead on center. No need to use a center punch to mark the damaged stud. Since it can be mounted in any orientation to access every single stud, the Ford 3.5L EcoBoost is a huge help for a frustrating repair.

What is the FORD 3.5L ECOBOOST Exhaust Manifold Repair Kit?

The FORD 3.5L ECOBOOST Exhaust Manifold Broken Bolt Stud Repair Kit, along with every other USA-made ProMAXX Tool solution, greatly reduces repair times, allowing professional vehicle technicians and skilled mechanics to quickly make the fix and move on to other jobs. The kit is easy to use, and it comes with instructions and schematics that show the best ways to mount the guide plate and use the included drill bit tooling to get at every broken bolt on the manifold.

Make the Broken Bolt Repair Fast…ProMAXX Fast!

With a focus on book time saved, return on investment, and increased productivity, experienced technicians and mechanically adept individuals who follow the provided instructions can use these kits to make the fractured stud repair in approximately 15 minutes per bolt. A professional-grade drive ratchet is required to make the repair.

How does the FORD 3.5L ECOBOOST Broken Bolt Repair Kit work?

Like all ProMAXX Tool broken bolt repair kits, the FORD 3.5L ECOBOOST Engine Exhaust Manifold Broken Bolt Stud Repair Kit stands out for its exclusive screw-in bushings and proprietary mating angles, which ensure perfect alignment of the ProPlate jig with the cylinder head. The ProPlate can be bolted in any position with included precision fasteners, providing unparalleled repeatable and predictable results. This level of accuracy and precision sets the kit apart from other products on the market, which rely on inexpensive clamps or loose slip-fit bushings. The accuracy allows the user to drill dead-center on the bolt hole. For previous repair attempts or botched repairs, the ProKit’s larger plate holes provide the use of a thread repair kit that includes bushings, bits, and black-oxide coated threaded inserts to restore the cylinder head to factory condition.

Premium Machine-Shop Grade Drill Bit Tooling Included

ProMAXX Tool’s USA-made machine-shop-grade tooling bits are ground at 135° cutting angle (lip) with a split point. Flat ground bits cut slower and are long lasting but less accurate and will walk while drilling. Split point ground bits will stay on center to reduce walking because they have four cutting edges and distribute loads better. They work well on curved shapes and alloy and stainless steels because it creates smaller chips to minimize clogging holes and breaking bits. To prevent drill bit breakage, closely follow the instructions in the Exhaust Manifold Repair Kit User Guide.

How To Remove Broken Exhaust Manifold Bolts Using the FORD 3.5L ECOBOOST Stud Repair Kit

The steps to use the FORD 3.5L ECOBOOST Repair Kit are detailed in the Exhaust Manifold Repair (EMR) manual. The manual provides a step-by-step guide on how to mount the ProPlate to the cylinder head, how to insert the ProBushing and ProDrill into the ProPlate, how to set the cutting edge, and how to extract the remnant or go Extractorless™ and drill the bolt out entirely. In the case of extraction or tap failure, ProMAXX Tool provides free 24/7 technical support at 724-941-0941.

Exhaust Manifold Bolt FORD 3.5L ECOBOOST Key Success Drivers

  • Fastest — ProKit Plus version includes interchangeable bushings with fasteners and Extractorless™ capability
  • Easiest — simple to bolt on and make the repair
  • Smallest — easily fits behind the shock tower
  • Most Precise — engineered .001” accuracy, .0001” dead flat
  • Versatile — Unique CNC machined thread repair kit available as well
  • Bolts to either top or bottom for ultimate versatility and accuracy
  • Can reduce repair times from 3-4 hours to under 40 minutes
  • Increase service ledger profitability
  • Patented and Made in U.S.A.

  • Add the PowerCut Pack: Platinum 188 Endmill Bit & Extra Bushing

    Part # W/2188 (200 Series) Bushing: PMXPWC2188

    Part # W/3188 (300 Series) Bushing: PMXPWC3188

    The Platinum Tooling Bit 188 Endmill and Bushing Accessory Kit includes an extra sacrificial bushing and a precision-made endmill. The platinum tooling endmill is excellent at flattening a broken extractor in preparation for drilling. Two versions available. PMXPWC2188 compatible with 200 Series jig plates. PMXPWC3188 compatible with 300 Series jig plates.

    Ford 3.5L EcoBoost Exhaust Manifold Broken Bolt Repair Kit - Elizabeth

    EcoBoost ProKit Part #: PMXEII200PRO

    Ford EcoBoost 3.5L Remove broken exhaust manifold studs / bolts. For Ford F-150 and Ford Transit. Made In USA. Twin turbochargers, broken titanium bolts, small engine bays, along with dimensional changes in the cast iron manifolds due to extreme heat create new problems for the servicing technician.

    Elizabeth II facilitates the removal of broken exhaust manifold bolts on Ford EcoBoost 3.5L engines.

    Type of Hose :
    Type of fiiting :
    Thread Size :
    SCFM :
    PSI range :

    Related Products

    SHIPPING INFO

    For Saturday delivery or special shipping instructions, please contact ProMAXX Tool M-F 8 a.m. – 5 p.m. EST at 724-941-0941. Expedited Orders Placed by 1pm EST will be Processed Same Day | UPS Ground Processing Time is 1-3 Business Days

    WARRANTY INFO

    Offering a range of policies

    NEED HELP

    Contact our support team today
    724-941-0941

    Promaxx Tool Address

    1121 Boyce Road
    Suite #2000
    Pittsburgh, PA 15241

    Any motor company logo on this site is a Registered Trademark. ProMAXX Tool is not affiliated with any of the motor companies on this site.