PowerDrill Powerful Air Drill w/Variable Speed Drive, 90 Degree Rotating Head

Experience enhanced efficiency and precision with the revolutionary ProMAXX Tool designed to navigate restricted access areas effortlessly, significantly reducing repair durations. Engineered to streamline operations, the ProMAXX® PowerDrill™ boasts cutting-edge features including an infinitely variable speed drive, a 90-degree PowerReach™ rotating extension head, and a formidable .3 horsepower PowerDrive™ motor, delivering unparalleled reach, velocity, and force.

Operating this advanced tool is a breeze. Begin by assembling the PowerDrive™ motor and extension, aligning the splined drive in the extension with the motor, and adjusting the head to the optimal angle for your task. Secure the position by hand-tightening the slip nut on the PowerDrive™ motor shaft. Connect a 90 PSI airline and fine-tune the speed settings using the variable speed dial, which offers five preset detents—MAX, ¾, ½, ¼, and MIN—while also allowing for infinite adjustments in between. Elevate your workflow with ProMAXX, where precision meets performance.

Powerdrill User Guide Info

PowerDrill

USER GUIDE

Thank you for purchasing the ProMAXX® PowerDrill™ PPD2800. We engineered the device to reach limited access areas helping technicians drive down on repair times and increase overall efficiency. The ProMAXX® PowerDrill™ features infinitely variable speed drive, 90 degree PowerReach™ rotating extension head, and a .3 horsepower PowerDrive™ motor that provides unprecedented reach, speed, and power. To operate, assemble the PowerDrive™ motor and extension by aligning the splined drive in the extension to the motor and rotate the head to the acceptable angle for your application. Hand tighten the slip nut on the PowerDrive™ motor shaft to maintain your selected angle. Attach a 90 PSI airline and adjust the variable speed dial to the tooling accordingly. The dial has five set detents, MAX, ¾, ½, ¼, and MIN speed, and infinitely variable between.

Key Features/Specifications

• Variable speed 0-2800 RPM & 25 IN-LBS torque
• Motor cylinder and rotor are hardened alloy steel to ensure proper alignment and long life
• Smooth quiet operation, 360 Degree Rotating Head.
• Includes cobalt tooling bits (PPD125, PPD188 & PPD266) and ProKey™ (PPCKEY280)
• One Year Warranty

Air Consumption

ProMAXX® PowerDrill™ is designed to run at 90 PSI. Drills consume 4-18 CFM of compressed air. Air should be clear of all condensation and debris. Condensation traps may be required in some climates. Beware of over lubricating or in-line oil systems that can cause over lubrication and lead to premature failure.

Oil

Daily oiling is not required. General maintenance consists of 1-2 drops of oil once a week or after heavy use in the port below and inlet. Oil should be inserted and run through the drill prior to storage. The oil is to protect the tool from corrosion during the storage period, not as a maintenance requirement or performance booster.

Grease

Grease should be used sparingly. Once grease has been inserted in the tool, no further grease should be required unless maintenance has been performed and grease cleared from tool.

Safety Operation

• Use tool for intended purpose only
• Do not exceed tool’s capabilities
• Avoid using the device when wearing loose clothing or long hair.
• Examine tool for defects and test prior to use in production

SAFETY PROCEDURE: ALWAYS USE APPROPRIATE SAFETY EQUIPMENT INCLUDING OSHA-APPROVED SAFETY GLASSES/ GOGGLES, HEARING PROTECTION, AND PROTECTIVE GLOVES WHILE USING THIS DEVICE.

PowerDrill Key Features/Specifications

• Variable speed 0-2800 RPM & 25 IN-LBS torque
• Motor cylinder and rotor are hardened alloy steel to ensure proper alignment and long life
• Smooth quiet operation, 360 Degree Rotating Head.
• Includes Premium Threaded ProDrill Cobalt Bits (PSSC125, PSSC188 & PSSC270) and ProKey™ (PPCKEY280)
• One Year Warranty